Regulated Switchmode AC-DC (GT-86060-06VV-X.X-W2)

Request Information Download PDF Configure Output Connector

Information

Model Number

GT-86060-06VV-X.X-W2

Description

GT-86060-06VV-X.X-W2, ITE Power Supply, Wall Plug-in, Regulated Switchmode AC-DC, , Input Rating: 100-240V~, 50-60Hz, NEMA 1-15P, North America Blades, Class II 2 Conductors, Output Rating: 6 Watts, 5-12VV in 0.1V increments, Approvals: LPS CE China RoHS Double Insulation Level VI PSE RoHS 2 Ukraine VCCI WEEE PSE cUL SGS

Agency Documents

http://www.globtek.info/certs/GT-86060-WWVV-W2Z/

CE EC-Declaration for Medical

Contact GlobTek for more information

CE EC-Declaration for Industrial/Commercial/ITE

http://globtek.force.com/models/ec_declaration?id=a0Oa000000MmdD4EAJ

RoHS/RoHS2 Declaration

http://www.globtek.com/pdf/rohs_cert/a0Oa000000MmdD4EAJ

REACH Declaration

http://www.globtek.com/pdf/iso_certificates/REACH.pdf

Conflict Minerals Declaration

http://www.globtek.com/pdf/conflict-minerals.pdf

Model Parameters

Type

Wall Plug-in

Technology

Regulated Switchmode AC-DC

Category

ITE Power Supply

Input Voltage

100-240V~, 50-60Hz

I/P Amps (A)

0.2A

Wattage (W)

Vout Range (V)

5-12V

Efficiency

Ingress Protection

IPX0

Size (mm)

66.5*25.5*51.3

Enclosure

Rating Table

Model Number	Voltage	Amps (A)	Watts (W)	RFQ
GT-86060-0505-W2	5	1	5	RFQ
GT-86060-0605-W2	5	1.2	6	RFQ
GT-86060-0612-W2	12	0.5	6	RFQ

Specifications

A) ELECTRICAL SPECIFICATIONS:
01. Input Voltage: Specified 90-264 Vac, Nameplate rated: 100-240Vac
02. Input Frequency: Specified 47-63 Hz, Nameplate rated 50-60Hz
03. Output Regulation: +/- 5%
04. Ripple and Noise (Vp-p): 300 mVp-p maximum, At 20 MHz, and output parallel with 0.1uF & 10uF capacitors to ground. Temperature at 25 °C, and nominal input voltage
05. Average Efficiency: 75.18% minimum, At 115VAC&230VAC input voltage, 1/4,2/4,3/4, and full load calculation average efficiency.
adapter meet Efficiency level COC V5 Tier 1 and DOE VI
06. Turn-ON Delay: 3 Seconds maximum at nominal input voltage
07. Rise Time: 100mS maximum at nominal input voltage

B) PROTECTION
01. Over-Voltage: 8VDC maximum
02. Over current protection: 2.4 A maximum with auto-recovery function
03. Short Circuit: Short circuit protection is to be included in the construction of the adaptor. The adaptor is designed to withstand continuous current of a short circuit on the output. The adaptor will be short circuit tolerant for an indefinite period.

C) SAFETY
01. Dielectric Withstand Voltage: Primary To Secondary: 3000VAC 10mA 1minute or 4242VDC 10mA 1minute
02. Leakage current: 0.25mA maximum

D) OTHER:
01. MTBF: 200,000 Hours @ 25°C ambient temperature
02. Operating Temperature: 0°C to 40°C ambient temperature
03. Humidity: 0% to 90% relative humidity
04. Storage Temperature: -20°C to 60°C
05. Cooling: natural convection cooling
06. ROHS 2: Complies with EU 2011/65/EU and China SJ/T 11363-2006

E) ENCLOSURE
01. Housing: High impact plastic, 94V0 polycarbonate, non-vented
02. Markings: Label and/or Pad Printed and/or Molded in the case

Derating Curve

Qty (ea.)/Carton

120

Individual Box/Gift Box Size (mm)

85*51*62

Individual Box/Gift Box Color

White

Master Carton Size (mm)

445 x 326 x 284

Gross Weight (kg)

15.6

Label Width (mm)

39.7

Label Height (mm)

16.2

Input Configuration

Description

NEMA 1-15P, North America Blades, Class II 2 ConductorsAll NEMA 1 devices are two-wire non-grounding devices (hot-neutral) rated for 125 V maximum. NEMA 1-15P plugs have two parallel flat blades, 0.25 inches (6.35 mm) wide, 0.06 inches (1.524 mm) thick, 0.625-0.718 inches (15.875–18.256 mm) long, and spaced 0.5 inches (12.7 mm) apart.

Output Configuration

Common output connector options:
Click to add to your request.


L Type (Coaxial 5.5x2.5mm plug)	C Type (Coaxial 5.5x2.1mm plug)	K Type (Coaxial 3.5x1.3mm plug)	LL Type (5.5x2.5mm Locking 760k type)	CL Type (5.5x2.1mm Locking S761k type)	Magnetic Connector

YL3 Type (KPPX-3P)	YL4 Type (KPPX-4P)	EJ1/2/3/4/5 (EIAJ RC-5320A type connectors)	MSB Type (Micro USB)	USBC Type (USB Type C)	Inquire for custom design

For a comprehensive list of options, click here

Contact GlobTek for your specific requirements or custom solutions.

Approvals

Logo	Description
	Attention Mark / Refer to operating manual for operating and service instructions
	CE Mark: tested to comply with EN55022:2006/A1:2007 Class B, EN610003-2, EN610003-3 including EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6N EN61000-4-11; EMI: Complies with EN55011 CLASS B and FCC Part 15B - On label or Molded in case
	CHINA SJ/T 11364-2014, China RoHS Chart: http://en.globtek.com/globtek-rohs.php
	UL 60950-1, 2nd Edition, 2014-10-14 (Information Technology Equipment - Safety - Part 1: General Requirements) CAN/CSA C22.2 No. 60950-1-07, 2nd Edition, 2014-10 (Information Technology Equipment - Safety - Part 1: General Requirements)
	Double Insulation - Mark is on the label or Molded in the case
	Indoor Use Only - Mark is on the label or Molded in the case
	JAPAN TUV R-PSE, Cert. No. JD 50315866, to J60950-1(H26) , J55022(H22),[15V or less]. Please reference the following website for guidelines on PSE regulations: http://en.globtek.com/importing-ite-and-medical-power-supplies-ac-adaptors-to-japan/
	Efficiency: complies to section 301 of Energy Independence and Security Act (EISA) complies with Energy Star tier 2 (North America), ECP tier 2 (China), MEPS tier 2 (Australia), Code of Conduct (Europe)
LPS	Limited Power Source
	JAPAN TUV Rheinland-PSE GlobTek Inc to J60950-1(H26) , J55022(H22),J3000(H25).Please follow the procedure listed in the following link for proper import to Japan: http://en.globtek.com/importing-to-japan.php.
RoHS 2	RoHS 2: Complies with EU 2011/65/EU and CHINA SJ/T 11363-2006 http://www.ce-mark.com/Rohs%20final.pdf
	SGS GS to EN 60950-1:2006 + A11:2009+A1:2010+A12:2011+A2:2013 AFPS GS 2014:01 PAK
	Ukraine UKRSepro (Document: www.globtek.com/html/iso_certificates/GT_Ukraine.pdf)
	Japan: Voluntary Control Council for Interference (VCCI)
	WEEE: Complies with EU 2012/19/EU (http://ec.europa.eu/environment/waste/weee/index_en.htm) Mark is on the label or Molded in the case

Popular Products

SKU	Volts Out	Current Out (Amps)	Connector
358933	12	0.5	Female Barrel 5.5 * 2.5 * 11mm with internal Spring Clip and Locking Notch or Equal
254769	12	0.5	Female Barrel 5.52.111mm w/ Spring Clip & Locking Notch or Equal
365431	12	0.41	MARUSHIN (SHOGYO INTL.) MP 121CR center positive or Equivalent
352426	5	1.2	Micro USB type B without resistor
358931	5	1.2	Female Barrel 5.5 * 2.5 * 11mm with internal Spring Clip and Locking Notch or Equal
358932	5	1.2	Female Barrel 5.52.111mm w/ Spring Clip & Locking Notch or Equal
262490	5	1.2	Micro USB type B without resistor
262486	5	1	Micro USB type B without resistor
239368	5	1	Micro USB type B without resistor
345092	5	1.2	Female Barrel 5.52.511mm, Right Angle with Spring Clip & Locking Notch or Equal
254769	12	0.5	Female Barrel 5.52.111mm w/ Spring Clip & Locking Notch or Equal
358933	12	0.5	Female Barrel 5.5 * 2.5 * 11mm with internal Spring Clip and Locking Notch or Equal
254769	12	0.5	Female Barrel 5.52.111mm w/ Spring Clip & Locking Notch or Equal
254769	12	0.5	Female Barrel 5.52.111mm w/ Spring Clip & Locking Notch or Equal
358932	5	1.2	Female Barrel 5.52.111mm w/ Spring Clip & Locking Notch or Equal
358932	5	1.2	Female Barrel 5.52.111mm w/ Spring Clip & Locking Notch or Equal
358932	5	1.2	Female Barrel 5.52.111mm w/ Spring Clip & Locking Notch or Equal
358932	5	1.2	Female Barrel 5.52.111mm w/ Spring Clip & Locking Notch or Equal
358931	5	1.2	Female Barrel 5.5 * 2.5 * 11mm with internal Spring Clip and Locking Notch or Equal
352426	5	1.2	Micro USB type B without resistor
352426	5	1.2	Micro USB type B without resistor
352426	5	1.2	Micro USB type B without resistor
358931	5	1.2	Female Barrel 5.5 * 2.5 * 11mm with internal Spring Clip and Locking Notch or Equal

GT-86060-06VV-X.X-W2 规格书

问询